Thermal Conductive Adhesive Manufacturer Ahmedabad, Gujarat, India

INTRODUCTION

Thermal grease is kind of uniform pasty substance which composes thermally conductive filler, high-temperature synthetic oil, stabilizer and additive. The color is white or grey. It is used in the place between the heating element and cooling device. The major advantage is its price and easy to repair. It can fill the heal sink and the device surface, reduce the thermal grease resistance contacting, so it is suitable for large power cooling device.

APPLICATION

It is widely used in various electronic products, and the surface between the heating element and the cooling device in the electrical equipment.
It is used in the contact surface between the radiator of the LED lamp and the PCB. Suitable For SMD and COB Lamp.
CPU, Power amplifier, thermistor, power module etc.

TECHNICAL SPECIFICATION

Model	Color	Conductivity (W/m-k)	Density (g/ml)	Cone Penetration (1/10mm)	Vdaf (%)	Brekdown Voltage (kv/mm))	Operating Temperature (oC)	Limit Temperature (oC)
FS-2107	White	1.0 + 0.2	>1.9	360 + 10	<1.0	>5.0	-40 ~ 200	-50 ~ 250
FS-2108	Grey	2.0	>2.5	320 + 10	<1.0	>5.0	-40 ~ 200	-50 ~ 250
FS-2109	Grey	3.0	>2.4	310 + 10	<1.0	>5.0	-40 ~ 200	-50 ~ 250
FS-2110	Grey	4.0	>2.3	310 + 10	<1.0	>5.0	-40 ~ 200	-50 ~ 250

INSTRUCTION

Please make sure the surface is absolutely clean before using.
The Thermal Grease could be coated on the objects directly by brush of scraper.

CAUTION

Please note that the thickness of the thermal grease will affect the efficiency of heat conduction, so please coat moderate quantity on the objects surface, and the thinner, the better
Keep Away from children
If contact with the skin, wipe clean, and then wash with water, if contact with eyes, immediately wash with water, and go to hospital and check.

Thermal Grease Manufacturer in Ahmedabad

PACKING

1kg/can, 12can/Box (Size of box :43 X 31.5 X 12cm)
300ml / tube, 25pcs / box (Size of box :25 X 25 X 23.5cm)

25kg / barrel (Size of box : D30 X H38.5cm)
Customized Special package

STORAGE AND TRASPORT

This product should be stored in a dry, cool place, avoid rain, sun exposure, storage period of 12 months (250 C). During storage a small amount of silicone oil may outflow, and this is a normal state, does not affect the use of results. If necessary, should be used after mixing evenly.
Such products are non hazardous and can be transported in general chemicals

Thermal Grease